Burning Hiren’s BootCD PE to a USB drive is most easily done by downloading the official ISO file and using Rufus to flash it. This creates a powerful diagnostic and rescue tool that allows you to troubleshoot hardware, recover data, and reset lost Windows passwords. Follow this step-by-step breakdown to set it up flawlessly. Prerequisites Before starting, gather the necessary resources:
A blank USB flash drive with at least 4 GB of storage capacity.
Important: Flashing will completely erase the flash drive. Back up all existing data first. Step 1: Download the Source Files Navigate to the official Hiren’s BootCD PE Download Page.
Scroll to the bottom of the page and click the filename link (e.g., HBCD_PE_x64.iso) to download the full disk image.
Go to the official Rufus Website and download the latest portable version. The portable version requires no installation and runs directly. Step 2: Configure Rufus
Plug your USB drive into an accessible port on your working Windows computer. Launch Rufus (accept any administrator prompts).
Verify your target flash drive is selected in the Device dropdown menu.
Click the SELECT button under Boot selection and locate your downloaded HBCD_PE_x64.iso file.
Press ALT + E on your keyboard. Look for a message at the bottom confirming “Dual UEFI/BIOS mode enabled”. This ensures the rescue drive works on both older and modern computer systems. Set the Partition scheme to MBR.
Set the File system to FAT32. Note that if your USB drive is 32 GB or larger, choose Large FAT32. If you don’t see it, press ALT + L to force Large32 formatting. Step 3: Flash the USB Drive Click the START button at the bottom of the Rufus window.
A warning box will appear indicating that all data on the USB device will be destroyed. Click OK to confirm and initiate the formatting process.
Monitor the progress bar. When the status changes back to a green READY indicator, the configuration is complete. Safely eject the USB drive from the operating system.
Watch this short video demonstration to see the entire Rufus creation process and how to use the finished recovery drive:
How to make HIREN Bootable USB | Ultimate tool for IT troubleshooting Tech Infokart YouTube · Dec 16, 2024 Step 4: Boot into Hiren’s BootCD PE
Insert your newly created recovery USB into the malfunctioning or locked computer.
Turn on the system and immediately start repeatedly pressing the system’s Boot Menu Key. Common keys include F12 (Dell, Lenovo), F9 (HP), or F8 / Esc (Asus, Acer).
Select your USB Drive from the boot choice menu list and press Enter.
The system will boot up into a familiar Windows environment loaded with utility software for troubleshooting.
If you would like to proceed, let me know what specific issue you are trying to fix (e.g., a forgotten Windows password, a hard drive failure, or data recovery) so I can guide you to the right tool inside Hiren’s environment. Create A Bootable Hiren’s Boot CD on USB Flash Drive (2018)
Leave a Reply